Posted on Tuesday, January 15th, 2013
Tonar Industries, a Bomar Interconnect franchised distributor, announces news from Bomar!
Bomar's patented EZ-RJ45 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool...crimps and trims in one cycle. Manufactured in the USA.
Features:
-
Thru holes allow wire pairs to be inserted thru front of connector for faster terminations
-
Works with solid or stranded wire
-
Simple one piece design...no bars or lines
-
FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks
-
RoHS compliant
-
EZ to verify wire sequence
-
Prolonged patch cord life
Installing the EZ-RJ45 Connector Video
EZ-RJ45 Datasheet
Posted on Tuesday, January 15th, 2013
Tonar Industries, a Belden franchised distributor, announces news from Belden!
Take a peek inside Belden's cable manufacturing plant's control cabinet. This is a typical control cabinet on Belden's factory floor.
Watch the Video
Posted on Monday, January 14th, 2013
Tonar Indsutries, a Hakko authorized distributor, announces news from Hakko!
After reflowing the soldered connection(s) with the Hakko 485 soldering system, residual solder remains in the PCB through-holes. The 486 removes the residual solder from the board with an air hood.
486 Air Unit Video
Posted on Friday, January 11th, 2013
Tonar Industries, an Alpha Wire franchised distributor, announces news from Alpha Wire!
EcoFlex is Alpha Wire's newest innovation in flexible control cables. By combining better performance and minimum environmental impact, EcoFlex, uses its mPPE (modified polyphenylene ether) insulation and jacketing to provide all of the advantages in a smaller, lighter, flexible control cable. EcoFlex cable contains no halogens, phthalates, or heavy metals. The mPPE thermoplastic insulation and jacketing can be easily recycled. They meet RoHS and WEEE requirements for the elimination of hazardous substances and recyclability.
Alpha Wire offers EcoFlex cable in three shielding options to handle any electrical environment:
-
Unshielded
-
Braid Shielded
-
SupraShield Foil + Braid Shield
EcoFlex Features:
-
Recyclable mPPE jacket and insulation
-
-40C to 105C static, -5C to 105C flexing temperature range
-
RoHS and REACH compliant
-
Suitable for use in NFPA 79 applications
EcoFlex Benefits:
-
Up to 32% smaller than PVC
-
Up to 55% lighter than PVC
-
Up to 91% lower outgassing
-
100% recyclable
-
Up to 8x Flexing Bend Radius
EcoFlex Brochure
EcoCable & EcoFlex Brochure
Posted on Monday, January 7th, 2013
Tonar Industries, a Mean Well franchised distributor, announces news from Mean Well!
After the launch of HVG(C)-100 (100W) series, MEAN WELL announced the extension of its HVG(C)-150 series of 150W AC/DC high input voltage LED power supply, in order to fulfill the higher wattage requirements for LED lighting applications. Compared with HVG(C)-100, the input voltage range of HVG(C)-150 had been increased to 180~528VAC, thus, they are fit for the general 230VAC main input, and also can be operated under 347/440/480VAC input in USA, Japan, and Canada. Designed with constant voltage (C.V.) plus constant current (C.C.) mode, HVG-150 series are low voltage output models (54VDC Max.) while HVGC-150 are high voltage output models (428VDC Max.). Both series are built-in two-stage PFC function, so that they can meet the harmonic current limitation per EN61000-3-2 Class C (>50~55% load), and they also fulfill PF>0.9 if loading over 50% (>70% load under 480VAC). In addition, they possess 4KV surge immunity (EN61000-4-5) ability which complies with the requirements of street lighting.
HVG(C)-150 has three options (A/B/D type) in different mechanisms and functions for your selection. In A type of HVG-150, users can adjust DC current range from 50% to 100% and output voltage ±10% by removing the rubber stopper on the cover. In A type of HVGC-150, users can adjust DC current range from 60% to 100%; B type models equip with three-in-one dimming function (0~10VDC, PWM, resistance) while D type models (optional) equip with “multiple stage timer dimming” function that can be customized by request. In addition, these two series possess up to 91.5% of high efficiency, so they can be cooled by free air convection from -40°C to +70°C ambient temperature and meet the high ambient temperature requirements for closed systems. In order to fit in with the outdoor harsh environment, aluminum case with fully potted by glue (IP65/67 structure) are also designed in these new power units. Beside standard functions of protections for short circuit, over voltage, overload, and over temperature, HVG(C)150 comply with global certificates per UL/CUL/FCC for HVG-150 and UL/CUL/TUV/CB/FCC/CE for HVGC-150, including UL8750 and EN61347-2-13 of lighting regulations. They are very suitable to be used in LED street lighting, LED high bay lighting, LED outdoor lighting and parking lot lighting…etc.
Features:
-
Wide range input 180~528VAC
-
Aluminum case and potted by glue, comply with IP65/67
-
Output voltage / current adjustable (please refer to the table below)
|
Model
|
Type
|
IP
|
Input/output
|
Vo/Io Adjustment
|
|
HVG/HVGC-150-xA
|
Standard
|
IP65
|
Cable
|
HVG-150:Vo/Io can be adjusted by internal potentiometer
HVGC-150: Io can be adjusted by internal potentiometer
|
|
HVG/HVGC-150-xB
|
Standard
|
IP67
|
Cable
|
Io can be adjusted by 0~10 VDC, PWM signal , or resistance (3-in-1 dimming)
|
|
HVG/HVGC-150-xD
|
Optional
|
IP67
|
Cable
|
Io can be adjusted by built-in control board (customized program by request; MOQ is required)
|
|
|
After the launch of HVG(C)-100 (100W) series, MEAN WELL announced the extension of its HVG(C)-150 series of 150W AC/DC high input voltage LED power supply, in order to fulfill the higher wattage requirements for LED lighting applications. Compared with HVG(C)-100, the input voltage range of HVG(C)-150 had been increased to 180~528VAC, thus, they are fit for the general 230VAC main input, and also can be operated under 347/440/480VAC input in USA, Japan, and Canada. Designed with constant voltage (C.V.) plus constant current (C.C.) mode, HVG-150 series are low voltage output models (54VDC Max.) while HVGC-150 are high voltage output models (428VDC Max.). Both series are built-in two-stage PFC function, so that they can meet the harmonic current limitation per EN61000-3-2 Class C (>50~55% load), and they also fulfill PF>0.9 if loading over 50% (>70% load under 480VAC). In addition, they possess 4KV surge immunity (EN61000-4-5) ability which complies with the requirements of street lighting.
HVG(C)-150 has three options (A/B/D type) in different mechanisms and functions for your selection. In A type of HVG-150, users can adjust DC current range from 50% to 100% and output voltage ±10% by removing the rubber stopper on the cover. In A type of HVGC-150, users can adjust DC current range from 60% to 100%; B type models equip with three-in-one dimming function (0~10VDC, PWM, resistance) while D type models (optional) equip with “multiple stage timer dimming” function that can be customized by request. In addition, these two series possess up to 91.5% of high efficiency, so they can be cooled by free air convection from -40°C to +70°C ambient temperature and meet the high ambient temperature requirements for closed systems. In order to fit in with the outdoor harsh environment, aluminum case with fully potted by glue (IP65/67 structure) are also designed in these new power units. Beside standard functions of protections for short circuit, over voltage, overload, and over temperature, HVG(C)150 comply with global certificates per UL/CUL/FCC for HVG-150 and UL/CUL/TUV/CB/FCC/CE for HVGC-150, including UL8750 and EN61347-2-13 of lighting regulations. They are very suitable to be used in LED street lighting, LED high bay lighting, LED outdoor lighting and parking lot lighting…etc.
|
-
Meet 4KV surge immunity level (EN61000-4-5)
-
Built-in active PFC function
-
91.5% high efficiency
-
Cooling by free air convection
-
Protections: Short circuit / Overload / Over voltage / Over temperature
-
Certificates: HVG-150: UL / CUL / FCC ; HVGC-150: UL / CUL / TUV / CB / FCC / CE
-
Dimension(L x W x H): 246 x 68 x 38.8mm
-
5 years warranty
HVG-150 Series
HVGC-150 Series
