Posted on Wednesday, June 27th, 2012
Tonar Industries, an ebm-papst franchised distributor, announces news from ebm-papst!
With dimensions 148x127x84mm, the new blower is about 10% more compact than the predecessor model, despite its superior performance. Moreover, the three core design reduces the natural vibrations, minimizing the transmission of additional structure-borne noise, which can be extremely unpleasant in heating installations. An optional integrated mass flow sensor in conjunction with a venturi nozzle and "GasBloc" pneumatic gas valve maintains a constant fuel/air mixture, regardless of atmospheric pressure or of wind or chimney suction. The ignition flame, the starting gas volume and other parameters can be calibrated to the boiler.
NRG77 Gas Blower Video
Posted on Monday, June 25th, 2012
Tonar Industries, a Cornell Dubilier franchised distributor, announces news from Cornell Dubilier!
Cornell Dubilier announced that its manufacturing facility in Mexicali, Mexico is poised to take on higher levels of production of both HID Lighting and Motor Run capacitors. AC capacitors are constructed with biaxially oriented metallized polypropylene film wound into a cylindrical roll. End contact is formed by zinc metal spraying all of the layers on each side of the winding which assures low ESR and low inductance. Metallized polypropylene film provides a self healing mechanism in which a dielectric breakdown “clears” away the metallization and isolates that area of the capacitor within microseconds. These capacitors boast low losses where very low Dissipation Factor and ESR allow for relatively high current density.
AC Brochure
oriented metallized polypropylene film wound into a cylindrical
roll. End contact is formed by zinc metal spraying all of the
layers on each side of the winding which assures low ESR and
low inductance. Metallized polypropylene film provides a self
healing mechanism in which a dielectric breakdown “clears”
away the metallization and isolates that area of the capacitor
AC capacitors are constructed with biaxially
oriented metallized polypropylene film wound into a cylindrical
roll. End contact is formed by zinc metal spraying all of the
layers on each side of the winding which assures low ESR and
low inductance. Metallized polypropylene film provides a self
healing mechanism in which a dielectric breakdown “clears”
away the metallization and isolates that area of the capacitor
Posted on Monday, June 25th, 2012
Tonar Industries, a Wall Industries franchised distributor, announces news from Tonar Industries!
Wall Industries, Inc. broadens its product offering with the DCMUA series of DC/DC power converters. This series delivers 5 Watts of continuous output power in an encapsulated, shielded metal package measuring just 2.0 x 1.0 x 0.4 inches. The DCMUA series consists of 3.3, 5, 12, and 15VDC single output and +/-5, +/-12, and +/-15VDC dual output models that operate over 2:1 input voltage ranges of 9-18VDC, 18-36VDC, and 36-75VDC. Standard featuresinclude high efficiency up to 87%, 1500VDC I/O isolation, and -55C to +95C extended operating temperature range.
±The DCMUA series of DC/DC power converters are RoHS compliant and have an MTBF rating of 1,960,000 hours. These converters are also protected against short circuit, over voltage, over load, and reverse voltage conditions. These converters are best suited for use in military applications, battery operated equipment, industry control systems, wireless networks, measurement equipment, telecom, and anywhere isolated, tightly regulated voltages and compact size are required.
DCMUA Series
Posted on Friday, June 22nd, 2012
Tonar Industries, an L-com authorized distributor, announces news from L-com!
There was a time in cabling history where every cable made had an incline connector terminated at each end. But that time ended long ago, though, and slowly but surely angled connectors have become more prevalent. Today, L-com offers a large variety of right-angle cables and adapters for all kinds of connectivity systems.
Adding a right angle to a cable is not as easy as just molding it differently. There are a lot of hurdles to overcome in the design, including how to keep the signal integrity (especially in the case of twisted pairs in Category rated cables or USB), how to allow a space for someone to solder the conductor (as in many right angle coaxial connectors), and how to protect the sensitive solder or crimp points from EMI/RFI and from physical strain. A cable manufacturer has to plan for these things and engineer a viable solution to them. Fortunately, L-com has come a long way from the early ways of right angles, and today you have many superior options to choose from:
Right Angle USB
Right Angle Coaxial Cabling
Right Angle Ethernet Cabling
Right Angle Fiber Optic
Right Angle Adapters
Posted on Thursday, June 21st, 2012
Tonar Industries, a General Cable authorized distributor, announces news from General Cable!
General Cable's Carol Brand products fulfill the complete wire and cable requirements of the fast changing electronics, sound and security marketplaces. They offer hook-up wire; communications cable; computer, coaxial and microphone cables; and special design for security systems, fire alarms and audio/video applications.
The EXZEL High-Endurance Electronic Cables are engineered for Cruel and Unusual Punishment. Choose EXZEL for extreme environments where unparalleled performance is critical and cable failures are not an option. An exceptional choice that offers complete peace of mind, this new cabling line EXZELS in applications where oil, liquids, vapors or other substances can attack the jacketing of conventional "round gray" PVC electronic cables.
EXZEL Interactive Catalog
