American Zettler has introduced a new line of relays - the AZ9405 Series, offering more switching power in the smallest overall packaging in the industry. The relay offers the highest UL load ratings and cycle life at 277VAC and elevated temperature at 85C. Applications for these relays include air conditioner fan controls, small appliance heating controls, interface relays for factory automation and communication equipment and much more. 

Specifically, the AZ9405 relay with PCB mount has been rated for the following:

• 10A @ 125VAC for 100k cycles at 85C

• 5A @ 277VAC for 100k cycles at 85C

• Low 200mw watt coil power

• HP ratings

• 1400VA AC power rating

• 4,000 VRMS dielectric

• Very small package size for the footprint

AZ9405 Series

ebm's Backward Curved Motorized Impellers save space and outperform conventional fans and blowers. These backward curved motorized impellers provide efficient air movement without complicated, costly scroll housings. Their space-saving design provides you with a completely integrated, dynamically balanced motor and impeller to assure long-term, efficient, maintenance-free, trouble-free operation. The impellers mount easily in any orientation and are totally speed controllable. You cannot select a better product for air performance, acoustic performance, compact size and versatile installation ease.

AC Backward Curved Motorized Impellers

Tonar Industries is pleased to announce NIC Components addition of NSPH series of  High Capacitance Multilayer Polymer Film SMT Chip Capacitors. Supplied in four EIA surface mount cases sizes; 1206, 1210, 1812 & 2220 in capacitance values from 0.1uF to 22uF with voltage ratings from 16V ~ 63VDC (11V ~ 45Vrms). NSPH series is rated for operating temperatures of -55°C to +125°C with typical capacitance change within ±5% of 25°C capacitance value.

NSPH series has advantages over high capacitance MLCCs capacitors in higher voltage ratings, stability over voltage, temperature and time. The low loss film construction is free from piezoelectric noise (MLCC distortion), free from MLCC cracking failures and exhibits superior low leakage current characteristics for green power applications. Open mode failure is added benefit of NSPH series, as compared to short circuit failure mode common to ceramic MLCC capacitors. NSPH is ideal for use in green power, network infrastructure, instrumentation, high-end audio, digital audio streaming equipment and audio DAC applications.

NSPH series is RoHS compliant and is halogen free. Supplied tape and reel packaged, for high speed automated placement and compatible with high temperature Pb-Free alloy soldering (+260degC soldering heat rated).

NSPH Series

After launching the rectangular shape metal case LED power units with high IP level and PFC function~ CEN-60-100 (60~96W), CLG-60-150 (60~150W), HLG-40H~320H (40~320W) series, MEAN WELL introduced another 70W LED power supplies with wider and shorter metal enclosure ~HSG-70 series, to fulfill the demands of certain length limited installations such as indoor/outdoor LED lighting and decorative lighting applications. Different from the general design that input in front and output in rear, the I/O connection of these new models are changed to the same side, which allows system designer a flexible wiring installation. In addition, to fit in with the outdoor harsh environment, HSG-70 series are designed with aluminum case, stainless screws, and fully potted by heat-conducted glue (IP65 structure), in order to protect the electronic components and provide the anti-moisture and anti-dust ability.

HSG-70 series not only fit for general 115VAC or 230VAC main input, but also can be operated under 277VAC input in North America. Built-in two-stage active PFC function, HSG-70 comply with harmonic current limitation per EN61000-3-2 Class C (>60% load). They also fulfill PF>0.9 if loading over 60% and possess 4KV surge immunity (EN61000-4-5) ability which complies with the requirements of general lighting. With up-to date high efficiency topology, HSG-70 possesses up to 90% of high efficiency, so it can be cooled by free air convection from -40℃ to +70℃ ambient temperature (-40℃ power on at 230VAC and above) that meets the requirements of outdoor installation. Besides standard functions of current adjustment by internal potentiometer, protections for short circuit, over voltage, overload, and over temperature, these power units are suitable for applications of LED high bay lighting, LED spot lighting, outdoor LED electric display, LED decorative lighting, and general indoor/outdoor LED lighting. Finally, they are also good solutions for general industrial applications at indoor or outdoor environment with high dust and moisture.

HSG-70 Series

RCD's new Multilayer Ceramic Chip Capacitor, the CE Series, is the industry's widest range and lowest prices: 0201 to 3035 size, .47pF to 100uF, 6.3V to 4KV (up to 20KV custom available). New X5R high-capacitance dielectric offers lower impedance and ESR (especially at higher frequencies), at lower cost and smaller size than tantalum, aluminum, and film styles. 

Quick delivery, wide selection available from stock! Lead-free tin plating is standard. Precision matching to 0.1% available.

CE Series

Kemet and the Tantalum Specialty Business Unit are pleased to announce the release of the New Tantalum Multi-Anode Hi-Rel COTS T513 Series.  This product compliments Kemet's other Hi-Rel COTS offerings including the T493 and T497 MnO2 Hi-Rel COTS Series and the recently released T540 and T541 KO Hi-Rel COTS Series. As with Kemet's other Tantalum COTS offerings, this product is manufactured to insure high reliability suitable for telecommunications, industrial,military, and aerospace applications.  

This current offering utilizes Kemet’s multi-anode technology which results in low ESR (down to 12 mOhms), high ripple current capability, surge robustness, and minimal capacitance roll-off over a wide range of frequencies and temperatures. Component level surge current testing, various termination finishes, and Weibull Grading options are available when ordering this product.

T513 Training Module

The DCHBW75 series of DC/DC power converters offers up to 75 Watts of output power in a standard 2.4" x 2.28" x 0.5" half-brick package. This series offers single output models with 4:1 input voltage ranges of 9~36VDC and 18~75VDC. The DCHBW75 series is well suited for use in wireless networks, semiconductor equipment,  industry control systems, and many other applications.

DCHBW75 Series

MEAN WELL introduced the first 185W AC/DC multiple channel constant current output LED power supply~ LDV-185 series. Built-in active PFC function, these units can offer 6 CH/ 700mA or 12 CH/ 350mA constant current outputs. Different from MEAN WELL’s other LED power supplies, LDV-185 series are built-in DC/DC constant current LED driver ICs, so that they can ensure the balance of output current from each channels that ensure the long lifetime of LEDs and reduce the EMI interference of the lighting system. LDV-185 has two kinds of models (Blank type/ D-type) for your selection. Blank type has basic features without “timer dimming” function and D-type (optional) equips with “timer dimming” function. After power on the system, D type model will start up the internal timer controlled by the MCU with pre-set counting program that up to three different time period (four different brightness levels) can be set to adjust the output current in each period. In addition, in order to fit in with the outdoor harsh environment, these series are potted by glue to reach the high dustproof/ waterproof level (IP67) and are designed by aluminum case as well as stainless screws.

Featuring with 180~295VAC AC input, LDV-185 series not only fit for general 230VAC main input, but also can be operated under 277VAC input in North America. Built-in active PFC function, these new series comply with harmonic current limitation per EN61000-3-2 Class C (>75% load). They also fulfill PF>0.9 if loading over 75% and possess 4KV surge immunity (EN61000-4-5) ability. With up-to date LLC topology, LDV-185 possesses up to 88% of high efficiency (based on the same LED quantity for each channel/ total wattage >120W), so it can be cooled by free air convection from -30℃ to +70℃ambient temperature that meets the requirements of outdoor installation. Standard functions include protections for short circuit, overload, over voltage, and over temperature. These power units equip with input cable of 18AWG*3C (with FG)/ 30cm and output cable of 22AWG*13C/15cm/15 pin waterproof connector + 22AWG*12C/15cm/12pin waterproof connector. They are also comply with certificates per EN61347-2-13 (LVD) and CE (EN55015/EN61547), which are suitable for all kinds of outdoor LED lighting applications, in particular for LED lighting fixtures with multiple channel driving design.

LDV-185 Series

Customized FR-4 connectors from Advanced Interconnect make affordable prototypes without sacrificing reliabilty. 

The Problem:

This military application called for a method to interconnect 3 PC boards in a defined space with a total applied cost under the existing stamped-and formed alternative. Their current connector system was costly and not robust enough to withstand the required 15,000 Gs.

The Solution:

Advanced Interconnections application engineers reviewed the complete product design, and drawing from the Advanced Tool Box, created a custom FR-4 insulator with application-specific length pins in prototype volume to allow for testing. Our unique design actually reduced the overall connector count from 6 to 3, while providing a robust, screw-machined solution at a lower overall cost.

The Result:

The Advanced solution was approved and the initial volume of 1,000 sets will ramp up to 10,000/per year. To further reduce costs as the volume increases, the design can be easily transitioned to a molded insulator. 

The new Biomaterial Fans from ebm-papst are energy-saving fans made of "epylen" wood/plastic composite material. The global innovation "biomaterial fan" has been developed in accordance with the toughest of industrial standards with respect to service life, durability, stability and thermal fluctuation. The new fans benefit from improved damping characteristics and are resistant to corrosion even without being painted. Features such as antibacterial or easy-to-clean coating are also possible.

Biomaterial Fan Video

Biomaterial Fan Press Release

MEAN WELL introduced another high wattage industrial power supply~RSP-2000 series, 2000W 1U low profile enclosed type switching power supply, which complete the product line of AC/DC enclosed type models with parallel and PFC functions. Now, MEAN WELL can offer users various options with different wattages of 600W, 1000W, 1500W, 2000W, 2400W, and 3000W. RSP-2000 is implemented innovative low power loss circuit topology which makes the efficiency up to 92%.  Featuring 21.4W/ in³ of extremely high power density, RSP-2000 series can provide full output power up to 50

RSP-2000 also implements advanced digital control technique that use microprocessor to deal with the power management job. It significantly increases the flexibility of PSU control and reduces the part count in the same time. To fulfill the requirements of high wattage applications from system users, RSP-2000 can increase the output wattage up to 7200W by the built-in parallel function (current sharing up to 4 units). In addition, RSP-2000 series use “constant current limiting plus delay shutdown” as the overload protection which enable the unit to power capacitive/inductive load and still provide full protection for customers’ system in the same time. Other built-in functions include remote sense, remote ON/OFF control, 12V/0.8A & 5V/0.3A auxiliary output, and DC OK alarm signal output (TTL signal). All series comply with UL, CUL, TUV, CB and CE regulations that can greatly guarantee your safety. Applications include LCD panel burn-in system, IC testing equipment, instrumentation, telecom, data storage, laser-carving machine, factory automation, ….and etc. that requires high rating of wattage supply.

RSP-2000 Series

MEAN WELL announced 75W/100W/150W DC-DC half-brick module type converters with regulated single output and size of 2.28”X2.4”X0.5” ~ MHB75/100/150 series. Along with these new series phased-in, MEAN WELL can offer various wattages from 0.5W to 150W for their DC-DC module converter product line , and also can fulfill the growing demands of miniaturization and high power density applications. In addition, the slim enclosure design helps system designers solve the tough issue of PCB space limitation and provides the flexibility in the power stage design. 

With industry standard packaging, these converters feature with 2:1 wide input range, 1500VDC input / output isolation, protections of short circuit, overload, output over voltage, and over temperature, low ripple noise, remote ON/OFF control, remote sense, and trimming output ( ±10%). With up to date high efficiency circuit design, MHB75/100/150 series possess up to 54.82W/ in³ of extremely high power density and up to 89% of high efficiency, hence, they can be full load operated by free air convection cooling or adding additional heat sink to keep the surface temperature under 100±5℃(For more details, please refer to the specifications). Besides, the built-in over temperature protection function can prevent the devices from damage while the unit temperature is over 100℃. These three series also comply with UL/CUL/CE certificates, which greatly guarantee the safety. Suitable applications include industrial control, telecom, networking, and distributed power architecture related applications.

MHB75 Series

MHB100 Series

MHB150 Series

Belden’s new line of Broadcast High-Definition BNC Connectors have earned the STAR Award (Superior Technology Award Recipient). They are designed specifically for Belden Brilliance Broadcast and Professional A/V coaxial cables, HD Brilliance Connectors maximize broadcast signal integrity, quality, performance and durability. 

Product Bulletin

Learn about which Littelfuse products provide optimal protection for components within photovoltaic (PV) systems in just three minutes! Expanding global standards require higher DC voltages and better equipment and Littelfuse has the solutions for all of those applications. Take a few minutes to watch the brief training module by clicking on the link provided below: 

Watch the Video

Hakko's new FM-2030 heavy duty soldering iron provides a higher mass tip with double the power of conventional Hakko T15 tips, making this iron the ideal solution for difficult-to-solder applications such as heavy ground planes and heat sink applications. The FM-2030 soldering iron can only be attached to the FM-203 "D" port and the FM-206 CH2 or CH3 ports.

In the telecommunications and electronics markets sectors, existing components are being replaced with new, more powerful compact TCA standard devices (Telecom Computing Architecture) at an alarming rate. The low construction volume of these components allows the flexible, modular upgrade or conversion of base stations such as mobile networks to fulfil market requirements. However, the flexibility of dividing components comes at a price: the heat generated by the modules must be dissipated reliably and consistently in the long term. The new S-Force air concept for compact, flexible modular systems was specially developed to reliably fulfil these requirements.

ebm-papst engineering teams are working with telecoms and electronics companies in both Australia and New Zealand to improve their engineered systems. In developing S-Force fans they have enabled these companies to build more complex and space efficient and cost efficient units allowing them to compete aggressively on global markets.

S-Force Fan Technology Video

Genie Group features Belden's PPO UL AWM Hook-Up Wire. This wire does not release the environmental pollutants characteristic of PVC-insluated wire. It is also fully-recycable and meets or exceeds the electrical and thermal characteristics of PVC wire, while being smaller, lighter and more durable. Belden's PPO Hook-Up Wire outperforms traditional PVC-insulated wire while being friendly to the environment and merits the use of Beldens's GreenChoice product rating!

Product Bulletin

Belden's Compression Connectors and Tools Bulletin

Wall Industries broadens its product offering with the new PSM250 and PSPW250 series of AC/DC switching power supplies. There supplies provide 250 Watts of output power with 17.1CFM forced air and 200 Watts with the convection cooling. These supplies have a 90~264VAC input voltage range and single outputs of 12, 19, 24, 28, 30, 36, 40 and 48VDC. The PSM250 and PSPW250 series are both available in open frame and U-chassis designs. Additional features include power factor > 0.9, no minimum load requirements, 85% high efficiency, and over load, over voltage, and short circuit protection. All models in there two series are RoHS compliant. 

PSM250

PSPW250

The RadiCall Backward Curved EC Fan is energy-efficient and gives more performance for less power. It is ideal for applications such as agricultural type and building ventilation, fan coils and air handling units. You can get the RadiCal EC fan in sizes 133mm up to 630mm. The special design of the impeller combined with our energy-efficient EC technology motor ensure energy-savings and significant noise reduction. 

Watch The Video

MEAN WELL launched new generation of 40W and 60W LED power supplies ~HLN-40H/60H and HLP-40H/60H series. Features with insulated plastic enclosure, HLN-40H/60H series can reach IP64 waterproof / dustproof level by its mechanical design and has cost-saving on glue. With casing removed and miniature PCB design, HLP-40H/60H series also has significant cost-saving on the mechanical parts. Therefore, these four series can be good solutions for LED lighting fixtures with economical concerns. Compared with the existing PLN-45/60 and PLP-45/60 series, these four new models not only increase 0.5~4% of efficiency and extend its warranty from 2 years to 3 years, their -40℃ power-on ability (at 230VAC) is also superior to the -30℃ of PLN/PLP-45/60. Besides, HLN-40H/60H-xxB and HLP-40H/60H models equipped with three-in-one dimming function (1~10VDC, PWM, resistance) to fulfill the growing demands of energy-saving dimming applications.

Built-in two stage active PFC function, these two series comply with harmonic current limitation per EN61000-3-2 Class C (>60% load). They also fulfill PF>0.9 if loading over 60% and possess 4KV surge immunity (EN61000-4-5) ability which comply with the requirements of general lighting. With up to date high efficiency topology, these new models possess up to 91% of high efficiency, so HLN-40H/60H can be cooled by free air convection from -40℃ to +50℃ ambient temperature, and HLP-40H/60H can be operated from -40℃ to +70℃ that meet the high ambient temperature requirements for closed systems. Besides built-in standard functions of protections for short circuit, over voltage, over current, and over temperature, these power units apply for global certificates per UL / CUL / TUV / CB / CE including UL8750 and EN61347-2-13 of lighting regulations, which can greatly guarantee your safety. Suitable applications include indoor LED lighting, LED electric display, LED decorative lighting, and LED stage lighting…etc.

HLN-40H

HLN-60H

HLP-40H

HLP-60H

Multiple Models:

ITW Chemtronic's New Freeze Sprays

Responding to the new global warming regulations has just become easier thanks to ITW Chemtronic's new Arctic Blast and Arctic Storm Freeze Sprays! They are the newest class of circuit coolants specifically designed to quickly cool surfaces while minimizing the use of global warming compounds.

ITW Chemtronic Freeze Sprays Are Used To:

• Test and locate for thermal intermittent components and systems
• Provide heat sink protection for heat sensitive components during soldering and desoldering
• Perform low temperature testing of prototype circuitry and electromechanical systems
• Locate hairline cracks in stressed traces of PC board
• Freeze adhesives for quick removal

MEAN WELL introduces 40W and 60W lower wattage models~HLG-40H (40W)series and HLG-60H (60W), to fulfill the middle to low wattage LED lighting applications. These two series have four options (A/B/blank/D type) in different mechanisms and input/output design for your selection. A type have two holes on the cover which allows users adjust DC output voltage range from 60% to 100% without opening the case; B type equips with three in one dimming function (1~10VDC, PWM, resistance). Through additional signal output cable, it offers system designers great flexibility for dimming operation and energy saving design; D-type (optional) equips with timer dimming function. After power on the system, D type model will start up the internal timer controlled by the MCU with pre-set counting program that up to three different time period (four different brightness levels) can be set to adjust the output current in each period. According to customer’s request, Mean Well can define auto brightness adjustment and the brightness level in each period by customizing the program. In the last, Blank type has basic features without voltage and current adjustment function. 

Featuring with 90~305VAC wide range AC input, HLG-40H/60H series not only fit for general 115VAC or 230VAC main input, but also can be operated under 277VAC input in North America. Built-in two stage active PFC function, these new series comply with harmonic current limitation per EN61000-3-2 Class C (>60% load). They also fulfill PF>0.9 if loading over 60% and possess 4KV surge immunity (EN61000-4-5) ability which complies with the requirements of street lighting. With up-to date high efficiency topology, they possesses up to 91% of high efficiency, so it can be cooled by free air convection from -40℃ to +70℃ ambient temperature (-40℃ power on at 230VAC and above) that meets the requirements of closed environment with high temperature. Besides standard functions of protections for short circuit, over voltage, over current, and over temperature, these power units comply with global certificates per UL/CUL/TUV/CB/CE including UL8750 and EN61347-2-13 of lighting regulations, which can greatly guarantee your safety.

HLG-40H

HLG-60H

   Multiple Models:

The DCB Series of metalized polypropylene film capacitors from Illinois Capacitor offers capacitance values from 7.5 to 55uF at voltages up to 1100VDC (1375VDC surge). Four leads are provided for excellent on-board stability and performance. 

The DCB Series includes 19 values, with voltage ratings of 700 to 1100WVDC. Operating temperature ranges from -40°C to +85°C for extended life in high-performance applications. Highly reliable, the expected failure rate is only 300 perbillion component hours.  Other features include very low self inductance and a rectangular, flame-retardant plastic case.

DCB capacitors are an excellent choice for power inverters, DC Link, AC/DC motor controls and welding equipment. With small size and a space efficient package design, they will help to reduce board size and case requirements. 

All values in the DCB Series are radial leaded, withcase sizes ranging from 42.5x33.5x22 to 57.5x50x30.  The parts are also fully RoHS compliant. Like other IC capacitors, each DCB Series capacitor is 100% burn-in tested.

DCB Series

Delta Group is celebrating their 40th anniversary of providing innovative, clean and efficient energy solutions for a better tomorrow! 

Watch the Video Here

Contact Us for Your Delta Group Needs

MEAN WELL continuously introduces the 320W models~HLG-320H series, to fulfill the demands of high wattage LED lighting applications. Featuring 90~305VAC wide AC input range, HLG-320H series not only fit for general 115VAC or 230VAC main input, but also can be operated under 277VAC input in North America. HLG-320H has five options (A/B/C/D/blank type) in different mechanisms and functions for your selection. For A/C type designs, users can adjust DC output voltage range from 90% to 110% and current range from 50% to 100% by removing the rubber stopper on the cover; B type equips with three-in-one dimming function (1~10VDC, PWM, resistance) and D type (optional) equips with “multiple stage timer dimming” function that can be customized by request; while Blank type has basic features without voltage and current adjustment function. In addition, in order to fit in with the outdoor harsh environment, aluminum case and stainless screws are designed in these new 320W LED power supplies.

HLG-320H Series

Features:

·         3 in 1 dimming function: 1~10VDC / PWM signal / resistance (B type)

·         Cooling by free air convection

·         Protections: Short circuit/Overload /Over voltage/Over temperature

·         Multiple Models:

·         Certificates: UL / CUL / TUV / CB / CE

·         5 years warranty

Tonar Industries is proud to showcase Advanced Interconnects new Customized Interconnect Solutions brochure. This new marketing tool is designed to communicate the AIC mission of partnering with customers to provide customized interconnect solutions. To help differentiate Advanced from other suppliers, they are promoting their innovative design engineering experience, combined with existing technologies (vertical integration) & components from their Tool Box, to create customized solutions. The new brochure effectively tells the story, featuring new photos of their high quality components starting from bar stock through the screw machine process, moving on to precision molding, drilling and inspection equipment, and finishing with photos of over 20 customized solutions designed for a variety of interconnect applications.

AIC Customized Solutions Brochure

Features:

·     Mini Sip is a single-in-line Reed Relay using only 12.1x4.3mm of board space which is half the standard SIP requirement

·     Epoxy molded single in line structure

·     Higher mounting density than DIP type

·     Completely washable

For More Information: Contact Us

Magnecraft power relay launches the RoHS-compliant 389F series relays

Features: 

·     Includes FLA/LRA Ratings for Compressor Applications and Ballast Ratings for Light Controls

·     Rated up to 50 A

·     Socket Compatible Models Available

·     Flux Tight Versions Available

·     Blowout Magnet Options for High DC Volatage Switching

389F Power Relay

The New Class J SPFJ Solar Fuse!

·     Reduces Space in PV Array Combiners and Inverters

·     Meets Both UL and IEC Global PV Standards

SPFJ Solar Fuse Video

Features:

·     High Voltage (16V-35V)

·     Up to 330uF Capacitance Value

·     High Ripple Current Capability

·     Volumetrically Efficient

·     Safe Failure Mode

·     Low ESR

·     Stable Temperature Characteristics

·     Pb Free#/RoHS Compliant & Halogen Free

T521 Series

Corcom SB Series

KEMET and the Tantalum MnO2 Business Unit are pleased to announce the release of the T489 Low DC Leakage MnO2 Series. This series of tantalum surface mount capacitors offers low DC leakage current, improved reliability and low ESR options. Applications that require these performance characteristics are targeted in the automotive and industrial market segments. Specific applications include tire pressure monitoring sensors and various wireless sensor circuits.

This surface mount series specifically offers DC leakage current that is 25% less than that of standard MnO2 tantalum surface mount capacitors. Reliability is also 2x that of standard and low ESR options are also available for many ratings. Ratings are available in standard EIA case sizes (KEMET Case A, B, C, D and X) with standard termination finishes.

T489 Series Product Training Module     T489 Product Bulletin     T489 Low DC Leakage MnO2 Series

This catalog showcases Genie Group's full line of fixed length cable assemblies (as they exist today). Cable assemblies (both fixed length and custom) have quickly become on of  their fastest growing product lines and they are doing their best to make sure that trend continues.

Amphenol Connex Cable Assembly Catalog

Greenlee just released a new eight page fiber brochure, MA-5636. The XL fiberTOOLS are designed for the professional to perform installation and maintenance measurements on fiber optic cabling networks. The instrument family consists of individual devices (optical power meters, 850/1300nm LED sources, 1310/1550nm Laser sources, Visual Fault Locator) and complete Insertion Loss Test Sets. The XL fiberTOOLS are designed to accurately measure optical power levels and link loss on multimode and singlemode cabling networks. These full feature general purpose fiber optic instruments are easy to operate and economically priced to outfit all technicians performing fiber optic installation and maintenance.

MA5636-XL Fiber Tools Series

MEAN WELL launches another 12W and 16W economical LED power supplies with rectangular plastic enclosure~ APV/APC-12/16 series. These new models mainly target at lower wattage applications such as indoor LED lighting, decorative lighting which have space limitation for the power supply. With non-PFC design and save part of the glue cost, AP series have price competitiveness to fulfill all kinds of economical applications. Meanwhile, to comply with various system designs, they have two modes for choice: APV series with constant voltage design (C.V. mode) and APC series with constant current design (C.C. mode). 

With up-to date high frequency switching topology, these four new series features with 90~264VAC input range and possess up to 84% of high efficiency, so that they can work between -30~+70 ℃by only free air convection. APV/C-12 (12W) are not potted while APV/C-16 (16W) are semi-potted for PCB protection to provide the basic ability of anti-moisture, anti-dust as well as heat-conduction purpose. They are very suitable for indoor LED lighting applications without the need of high level waterproof and dustproof requirements. Built-in standard features include short circuit, overload, over voltage protections, and wire-style input/output (18AWGx2C (15cm) / 20AWGx2C (15cm)) for flexible installation. 

APV-12

APV-16

APC-12

APC-16

Features:

·     High Air Flow and Static Pressure

·     Energy Saving

60 G Type

Features:

·     Ultra-Small Low Profile 0201, 0402, & 0603 Sizes

·     High Current & High SRF

·     Compatible with Pb-free Smoldering

·     RoHS Compliant

NTI

The adapter allows a connection from ebm-papst RS485 twisted-pair fan connections to a computer USB port.

Features:

·     works with ebm-papst EC Control 2.0 or later software 

·     opto-isolation to 2500V protects connected devices from overvoltage

·     ambient temperature range 0-70ºC (32-158ºF)

·     powered from the computer USB interface

USB to RS485

·     100W AC-DC Open Frame

·     2" x 4" Size

·     Active PFC (meets EN61000-3-2)

·     High Efficiency 85% Typical

CFM101S series is new Open Frame AC/DC power modules with 2.0 x 4.0 x 1.1 Inches package. The outputs of CFM201S are 12, 15, 20, 24, and 28VDC and free air convection for 100W. Input range is 90-264VAC with active PFC (meets EN61000-3-2). High Efficiency operated from 0 to +40°C. 

CFM101S Series

Wall Industries, Inc. broadens its product offering with the new CV series of constant voltage non-isolated DC/DC converters. This series can deliver up to 3A of output current in a small open frame package. These converters have output power ranging from 1.8 to 45 Watts and operate over input voltage ranges of 2.5-5.5, 4.5-14, and 10-30VDC. This series also provides non-regulated single outputs of 5, 12, and 24VDC. Standard features include efficiency up to 95%, remote ON/OFF, and adjustable output voltage. All models in the CV series are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety approvals.

The CV series of non-isolated DC/DC power converters have no minimum load requirements and operate over an ambient temperature range of -40°C to +85°C (with derating). This series has both vertical and horizontal SIP mounting configurations available. 5V and 12V models are 0.37” x 0.24“ x 0.61” in size and have a weight of 0.06oz and the 24V models are 0.41” x 0.24” x 0.65” in size and weigh only 0.074oz. These converters have a MTBF rating of 6,250,000 hours using Bellcore TR-NWT-000332 and 1,638,000 hours using MIL-HDBK-217F. These converters are also protected against over current, over temperature, and short circuit conditions. The CV series is ideal for a wide range of applications some of which include wireless networks, telecom/datacom, industry control systems, semiconductor equipment, distributed power architectures, and microprocessor power applications.

CV Series

·     Used for High Temperatures Up To 200ºC

·     50 vdc Rated

·     TC More Stable Than Traditional High Temp Products

·     Applications Including: 

           - Down Hole Oil Exploration 

           - Automotive

          - LED Signal and Traffic Lights

High Temp MLCC (HTC Series)

·     TFT technology capable of generating a vivid picture

·     1.80” diagonal viewing area

·     High responsiveness for video capabilities

·     High color density

·     Digital interface input allows for full utilization of image data

ET018003DMU

MEAN WELL further expanded their AC/DC Green Adaptor line and introduced the GS05U-USB series, 5W single output (5V/1A) wall-mounted type adaptor with USB outlet. Using the standard 2 pin AC plug (US type) at input side and standard USB (Type-A) as the output connector, this unit is 90~264VAC full range input and complies with EISA 2007(Energy Independence and Security Act of 2007) required by USA Federal Government. Possessing very low “no load power consumption” (<0.3W) at standby mode, it also has better conversion efficiency than the required level of EISA 2007, which is a real energy-saving product at both standby mode and active mode. 

Features:

·     Class II power (no FG)

·     Working temperature between -20~+50℃

GS05U-USB

KEMET’s High Temperature 200°C Series features a robust and proprietary base metal dielectric system that offers industry-leading performance relative to capacitance and case size combined with capacitance stability at extreme temperatures up to 200°C. This platform promotes downsizing opportunities of existing high temperature C0G technology and offers replacement opportunities for existing X7R/BX/BR technologies. 

“KEMET’s industry-leading C0G technology continues to outperform X7R in the most extreme environments. With virtually no capacitance change at 200°C and rated voltage, C0G actually has a higher effective capacitance than most X7R options,” said Bill Sloka, KEMET Specialty Product Manager. “Our customers in the down-hole, industrial, avionics and automotive markets require the higher capacitance, temperature stability, reliability and reduced size this platform offers.” 

High Temperature 200°C

MEAN WELL introduced the second generation of 100W enclosed type single output DC/DC converter~RSD-100 series, to fulfill the various requirement of vehicle applications. With up to date high efficiency circuit design, RSD-100 series possess up to 91% of high efficiency. All series are semi-encapsulated for PCB protection to provide the basic ability of anti-moisture, anti-dust, heat dissipation as well as anti-vibration. Therefore, they can be cooled without any forced-air but still can work between -40℃ to +70℃ ambient temperature, which perfectly fit in with the applications of harsh environment with high ambient temperature, high dust and moisture. The design of these new converters are refer to ITE standards (IEC60950-1 and EN55022) and also comply with railway certificates (EN50155, IEC60571, IEC61373, EN50121-3-2), so that they are suitable to be used in all kinds of vehicles that equipped with DC power source. The applications include railway, metro rapid transit system, subway, bus, leisure trailer, and vessel...etc. In addition, along with external batteries as the energy source, they are also suitable for harsh industrial installations that concern about dust and moisture, such as security system, DC UPS system, and telecom equipments…etc.

Features:

·     2:1 wide input range (±40%) / 14.4~33.6VDC, 28.8~67.2VDC, 57.6~154VDC

·     4000VDC input/output isolation

·     Protections: Short circuit / Overload / Over voltage / Input reverse polarity (no damage)

·     -40~+70℃ wide operating range

RSD-100

Features:

·     Super high precision resistors with a wide resistance range of 100O – 5.11MO respond to tolerance ±0.01% and T.C.R.      ±5×10-6 /K

·     Extremely stable resistors with less variation ±0.01%/year

·     Designated resistances (marking in 4-digit effective figures) of tolerances ±0.01% – ±0.25% are available

·     Products meet EU RoHS requirements

SF

KEMET Multilayer Ceramic Capacitors (MLCCs) are a preferred capacitance solution, offering tremendous performance, reliability and cost advantages for circuit designers. Their comprehensive line of surface mount and through-hole devices are utilized in a wide variety of computer, telecommunications, automotive, military, medical and consumer electronics. Primary applications include decoupling, filtering, bypassing and smoothing. 

Ceramics are non-polar devices which offer unsurpassed volumetric efficiency, delivering the highest capacitance in the smallest package sizes in the market. Available in a wide range of sizes, KEMET MLCCs offer very low equivalent series resistance (ESR), exhibit excellent high frequency characteristics and are extremely reliable. KEMET is driving ceramic capacitor technology advancement, resulting in smaller case sizes, better performances and lower costs. These factors have accelerated the progression of readily available ceramics into markets and applications previously occupied by tantalum, aluminum and film capacitors, lowering the risk of material shortages. 

X5R

Next generation inverter designs for renewable energy applications demand reliable DC link capacitors with higher capacitance values, voltage, and current ratings. Cornell Dubilier's expanded range of Types 947C and 944U power film capacitors meet or exceed the requirements for bulk energy storage, ripple filtering and life expectancy for wind and solar power inverter designs, as well as electric vehicle applications. Select from hundreds of standard catalog listings, or connect with CDE engineers to develop special designs to your requirements.

Features:

·     Capacitance Values to 1500 µF

·     Applied Voltage to 1400 Vdc

·     Ripple Current Ratings to 100 A_rms

947C

944U